All Issue

2019 Vol.30, Issue 2

April 2019. pp. 37-47
Abstract


References
1 

J. H. Jo, S. Lee, H. J. Seo, J. H. Lee, and J. M. Kim, “Design of omnidirectional camera lens system with catadioptic system,” Proc. SPIE 8788, 87882Q (2013).

2 

D. P. Kuban, H. L. Martin, S. D. Zimmerman, and N. Busico, “Omniview motionless camera surveillance system,” U.S. Patent No. 5359363 A (1994).

3 

S. K. Nayar, “Catadioptric omnidirectional camera,” in Proc. IEEE Computer Society Conference on Computer Vision and Pattern Recognition (USA, Jun. 1997), pp. 482-488.

4 

D. G. Aliaga and I. B. Carlbom, “Camera model and calibration procedure for omnidirectional paraboloidal catadioptric cameras,” U.S. Patent No. 20030004694 A1 (2002).

5 

G. Kweon (NANOPHOTONICS CO., LTD), “Method for obtaining a composite image using rotationally symmetrical wide-angle lenses, imaging system for same, and cmos image sensor for image-processing using hardware,” U.S. Patent No.20120098926 A1 (2012).

6 

J. H. Lee, “Omnidirectional optical lens,” KR. Patent No. 1020110131472 (2011).

7 

HEXHIVE CO., LTD, “Catadioptric Type Omnidirectional Optic Lens and Omni-directional Camera System Using the Same,” KR. Patent No. 1020150178832 (2015).

8 

B. Yalin, “Parameter Extraction and Image Enhancement for catadioptric omnidirectional cameras,” Master’s Degree Thesis, The Middle East Technical University, Ankara, (2005), p. 114

9 

H. Y. Jung and J. U. Lee, “Optical design of a catadioptric panoramic lens system,” J. Ind. Sci., Cheongju Univ. 30 (2013).

10 

J. W. Kim, J. M. Ryu, and Y.-J. Kim, “Tolerance analysis and compensation method using zernike polyomial coefficients of omni-directional and fisheye varifocal lens,” J. Opt. Soc. Korea 18, 720-731 (2014).

10.3807/JOSK.2014.18.6.720
11 

H. J. Seo and J. H. Jo, “Catadioptric omnidirectional optical system using a spherical mirror with a central hole and a plane mirror for visible light,” Korean J. Opt. Photon. 26, 88-97 (2015).

10.3807/KJOP.2015.26.2.088
12 

K. H. Lee, J. G. Kang, and J. H. Jo, “Optical design of a catadioptric omnidirectional LWIR vision system with F/1.4 and a field of view of 30°~110° and analysis of its tolerance and athermalization,” New Phys.: Sae Mulli. 67, 754-764 (2017).

10.3938/NPSM.67.754
13 

T. G. Park, “Design of omni-directional optical system using only 4-mirrors in two ranges of long wave infrared and visible light,” Master’s Degree Thesis, Hannam University, Daejeon (2017).

14 

J. M. Lee, “Optical system design and analysis of an F/1.8 catadioptric panoramic camera,” Master’s Degree Thesis, Dankook University, Yongin (2014).

15 

J. G. Kang, J. M. Ryu, and J. H. Jo, “Design of IR omni-directional optical system for night vision and surveillance of defense and safety,” Proc. SPIE 9451, 94511Y (2015).

10.1117/12.2176886
16 

Warren J. Smith, Modern Lens Design (second edition), (McGraw-Hill, New York, 2005), p. 67.

17 

J. X. Cai, M. Guo, and G. Y. Jin, “Numerical simulation of thermal stress damage in 1064 nm anti-reflection fused silica by millisecond pulsed laser,” Optik 136, 144-150 (2017).

10.1016/j.ijleo.2017.02.019
Information
  • Publisher :Optical Society of Korea
  • Publisher(Ko) :한국광학회
  • Journal Title :Korean Journal of Optics and Photonics
  • Journal Title(Ko) :한국광학회지
  • Volume : 30
  • No :2
  • Pages :37-47
  • Received Date :2019. 02. 07
  • Revised Date :2019. 03. 19
  • Accepted Date : 2019. 03. 28