All Issue

2019 Vol.30, Issue 1 Preview Page

February 2019. pp. 8-14
Abstract


References
1 

United Nations Economic Commission for Europe vehicle regulations, ECE Regulation No. 112-Rev. 3 (2013).

2 

M. Sivak, M. J. Flammagan, B. Schoettle, and G. Adachi, "Chromatic aberrations near the cutoff of low-beam headlamps," Report No. UMTRI-2004-6 (2004).

3 

H. S. Lee, H. J. Park, and J. S. Kwak, "Improvement of disturbing color effects depending on the axial color of an automotive headlamp lens," Appl. Opt. 56, 5106-5111 (2017).

10.1364/AO.56.00510629047663
4 

B. Y. Joo and J. H. Ko, "Optimization of cutoff shields in projection headlight systems to achieve high intensity gradient and low color separation at the cutoff line," J. Opt. Soc. Korea 20, 118-124 (2015).

10.3807/JOSK.2016.20.1.118
5 

E. M. Park, Master's Thesis, Pukyong National University, Busan (2018), p. 37.

6 

S. P. Ying and J. C. Lyu, "Ellipsoidal reflector design of the LED vehicle projector type headlamp," Proc. SPIE 9954, 1-8 (2016).

7 

R. R. Shannon, "Tolerancing Techniques," in Handbook of Optics, 3nd ed., Vol. 2, M. Bass, Ed. (McGraw-Hill, New York, USA, 2010).

22122082
8 

K. L. Kelly, "Color designations for lights," J. Opt. Soc. Am. 33, 627-632 (1943).

10.1364/JOSA.33.000627
9 

R. Melikov, Master's Thesis, Koç University, Istanbul (2016), p. 25.

Information
  • Publisher :Optical Society of Korea
  • Publisher(Ko) :한국광학회
  • Journal Title :Korean Journal of Optics and Photonics
  • Journal Title(Ko) :한국광학회지
  • Volume : 30
  • No :1
  • Pages :8-14
  • Received Date :2018. 12. 11
  • Revised Date :2019. 01. 11
  • Accepted Date : 2019. 01. 17